EOS Rebel T5 "Card cannot be accessed. Reinsert/change card or format card

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-21-2016
01:28 PM
- last edited on
02-08-2024
08:49 AM
by
Danny
I just got this error on my T5. When I try to take a picture, it says: "Card cannot be accessed. Reinsert/change card or format card with camera." re-inserted but no luck.
So, I try to format the card from the camera menu settings, and it says "Cannot format. Change card."
I even tried re-formatting the cards on my computer, but still no luck. the card works on other cameras, so it's not the card.
I have used this card in the camera before and never had a problem, this just happened all of the sudden.
PLease help. My camera is only 4 months old.

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-07-2020 12:03 PM
Thank you, This was exactly the problem I was having with a new card....

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-19-2021 06:42 PM
I ran into this same problem today with my 70D. I've had the card read error intermittently for a few months and popping the card out then reinserting it always fixed it. My solution was easier. I cleaned the contacts on the card!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-07-2024 10:52 AM
To people from the future, this was the hint I needed. The cards themselves were all fine, but I blew into the card port like an NES cartridge and it remedied my issue. Suddenly the camera could read my cards.

- « Previous
- Next »
- « Previous
- Next »