11-10-2023 10:25 AM - last edited on 11-10-2023 10:27 AM by Danny
Can anyone tell me how to setup this camera so that whe I push the button to all the way down I do not have to wait 5 or 6 seconds for the picture to be taken. Thanks
Solved! Go to Solution.
11-10-2023 10:31 AM
Check the drive mode. It's probably set to 6 second delay. You can set it to single shot, continuous low and continuous high. Depending on what mode the top mode dial is set to.
11-10-2023 10:31 AM
Check the drive mode. It's probably set to 6 second delay. You can set it to single shot, continuous low and continuous high. Depending on what mode the top mode dial is set to.
11-10-2023 10:32 AM
Thanks it worked....
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.