02-12-2023 11:46 AM - last edited on 02-14-2023 10:07 AM by Danny
so i always shoot with AEB on. but every time i turn my camera back on, the AEB setting is gone. i have to keep remembering to set it up again. is there anyway to save its setting? or all settings of the camera?
Solved! Go to Solution.
02-12-2023 12:17 PM
See page 527 of the User Manual. There's a custom function (C.Fn I-3: Bracketing auto cancel). There it states:
"You can specify to cancel AEB and white balance bracketing when the power switch is set to <OFF>". Setting that custom function's value to 1 will disable it, so your AEB settings should survive across power downs.
02-12-2023 11:47 AM
What specific camera are you using?
02-12-2023 11:49 AM
ooppss Canon RP. Av Mode
02-12-2023 12:17 PM
See page 527 of the User Manual. There's a custom function (C.Fn I-3: Bracketing auto cancel). There it states:
"You can specify to cancel AEB and white balance bracketing when the power switch is set to <OFF>". Setting that custom function's value to 1 will disable it, so your AEB settings should survive across power downs.
02-12-2023 12:23 PM
dude 👏🏽
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.