10-28-2022 01:44 PM - last edited on 10-28-2022 01:52 PM by Danny
I recently bought a canon R6 and for my strobe lights I use pocket wizzards plus II . I have noticed that there is no place to plug my pocket wizzards into my R6. my question is there a different type of sync cord I can get to be able to use my pocket wizzards with my R6 or am I going to have to get a whole different set up for transceivers. Any help on this would be very much appreciated. thank you
10-28-2022 02:02 PM
What are you using now? A PC sync connector?
10-28-2022 02:11 PM
10-28-2022 05:09 PM
10-28-2022 08:22 PM
Thank you so much I will give this a try
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 18.104.22.168
PowerShot SX420 IS - Version 22.214.171.124
PowerShot 620 HS - Version 126.96.36.199
PowerShot SX720 HS - Version 188.8.131.52
PowerShot G1X Mark III - Version 184.108.40.206
PowerShot G7X Mark II - Version 220.127.116.11
PowerShot G9X Mark II - Version 18.104.22.168
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.