11-30-2024 09:32 AM - last edited on 11-30-2024 09:34 AM by Danny
While photographing Xmas lights outdoors, the screen on was an annoyance, so I changed some screen display option and now screen will not display at all.
Anyone have this issue? There is no screen display so I can't tell anyone what screen option I picked.d
Camera is near useless without the display.
11-30-2024 09:38 AM
Greetings,
if you review the manual, you'll see there's a option for "Screen".
If you don't want to do that, just reset the camera and it'll start working again.
~Rick
Bay Area - CA
~R5 C (1.0.9.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, ~RF 200-800 +RF 1.4x TC, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve Studio ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8 ~CarePaks Are Worth It
11-30-2024 11:17 AM
Look in the viewfinder, the menu will appear in there. You can go back to the setting where you turned off the back screen and choose AUTO1 to make the camera auto switch screens.
in the future you can just fold the rear screen in to the camera to stop it illuminating at night rather than switch it off in the menu.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.