01-04-2022 05:16 PM - last edited on 02-28-2024 08:35 AM by Danny
I do lots of wildlife photography with my R5 and compare it with my fellow photographers who have the same body camera for some reason, I have lots of noise in my images and they don't.
I always shoot with electronic high-speed continuous plus.
Can someone tell me if I have to adjust any settings in the menu?
02-28-2024 12:48 PM
Thank you John,
Somehow I didn't see the camera temperature values Peter listed before I wrote my previous reply. So, I misunderstood, thinking it was about air temperature distortions. Now I understand. I guess I have to keep an eye on the camera temperature. I'll follow John's suggestions on keeping camera cool. Is there a way to read the temperature on the camera itself rather than finding out later through image Exif?
As for "Sensor Cleaning" the camera automatically runs that sequence everytime I power off the camera. May be that is not enough. Are there any guidelines when I should manually run that?
Thanks again for all the suggestions.
02-28-2024 01:14 PM - edited 02-28-2024 01:29 PM
I ment heat distortion between you and the Eagle. The last picture you shared looks better.
The camera temperature may be the culprit for more visible hot pixels.
See the part about red/white/blue dots https://support.usa.canon.com/kb/index?page=content&id=ART178307
"thermal noise doubles for each 6 degree C increase in temperature"
I didn't know it was that big difference. Thanks
02-28-2024 09:06 PM - edited 02-28-2024 09:08 PM
Thanks again Peter. On the hot pixels issue, that KB says this <<White, red, or blue dots of light may appear in captured images if the sensor is affected by cosmic rays or similar factors>>
Now I am wondering if I might have damaged the sensor by one day pointing the camera to the setting sun to take a time lapse sequence. Thinking back that was a very stupid thing to do on my part. If such damage happened, do you know what my options are in getting that corrected? Thanks.
02-29-2024 01:58 AM
Unlikely. Your hot pixels are in random positions all around the sensor. Cosmic rays will always hit your sensor.
If you use Lightroom it will remove most of them automatically, but some will be harder to remove. It is therefore a good idea to map as many as possible out already in camera via the sensor cleaning menu.
03-04-2024 06:58 PM
I think now I understand what you have described. I have done a "Sensor Clean" and will test to see if I still see hotspots in the future.
Thank you again for your input on my issue. For now I'm all set. I'll contact you again if I need help in the future.
01-04-2022 05:49 PM
01-04-2022 05:58 PM
Peter. I sent you edited files. I'll forward later unedited raw files.
01-05-2022 03:30 AM
Seems like sharpening has been done to the pictures and some kind of noise reduction also.
01-05-2022 06:16 AM
I do have a smart sharpening software and downsize the images to 2048px for social media.
01-04-2022 06:15 PM
What lens and focal length are you using? How far aware were you?
What were your exposure settings? Camera AF mode and AF point settings?
Has this image been cropped?
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.