10-01-2019 03:39 PM
Strangest thing. The EOS R that I have will occasionally (not often) get "stuck" with a really bright LCD screen. No amount of touching the back LCD or fiddling will pull the camera into proper exposure. The only thing that works is turning the camera off and then back on again.
Is this a known bug, or should I send this unit back?
10-01-2019 03:55 PM
After some testing, I see that this occasionally happens right after taking a lens cap off. When you turn on the camera before taking the lens cap off and then remove the lens cap, the camera LCD appears very bright as the camera meter adjusts exposure to the light. Sometimes, though, the exposure never gets adjusted down, and the LCD (and picture) remains intensely bright.
09/26/2023: New firmware updates are available.
CN-E45-135mm T 2.4 L F - Version 1.4.0
EOS 1DX Mark III - Version 1.8.0
EOS R6 Mark II - Version 1.2.0
08/18/2023: Canon EOS R5 C training series is released.
07/31/2023: New firmware updates are available.
05/31/2023: New firmware updates are available.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
03/30/2023: New firmware updates are available.
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.