08-29-2024
03:43 PM
- last edited on
08-29-2024
03:47 PM
by
Tiffany
90D keeps going into AUTO ISO. All settings show ISO shift is not active.
08-29-2024 03:54 PM
What are the settings the camera has now? What shooting mode are you using . . . the knob on top left side?
AUTO ISO is an automatic part of some shooting modes.
Do you have the manual for the camera?
08-29-2024 04:00 PM
Everything is in manual. It doesn't do it all the time just occasionally. Safety shift is disabled. Touch screen is disabled. I've double and tripled checked the guide manual.
08-29-2024 10:20 PM
At this stage I would do a factory reset and then try it out. If that is not enough, turn it off, remove the battery, card and lens and let it sit for a day or so to go into deep discharge. Then put them all back in again and fire it up. After that, if it does not work, I suggest calling 800-OK-CANON if you live in the US to have a talk with a friendly Canon tech.
09-04-2024 01:28 PM
Ill give it a try.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.