10-10-2022 11:45 AM - last edited on 10-11-2022 09:32 AM by Danny
Hi
I have a Canon camera (80d)
I charged the camera battery
After charging and installing the battery to the camera
The camera turns on but does not focus ( manual and automatic) and shows blur everywhere.
What is the problem?
10-10-2022 03:36 PM
Yes bro
10-10-2022 04:07 PM
I changed it but anythings didn't change.
10-10-2022 03:42 PM
10-10-2022 03:43 PM
See this picture please
10-10-2022 03:45 PM
Looks like the lens is broken.
10-10-2022 04:58 PM - edited 10-10-2022 09:40 PM
Has OP by chance decoupled the shutter and AF start to back button focus. If BBF is setup with the "AF-On" button or "*" button. AF will not work half pressing the shutter. Or trying to manually focus with an STM or Nano USM lens.
-Demetrius
40D, 5D IV, EF 16-35mm F/2.8L III, EF 24-70mm F/2.8L II, EF 28-135mm F/3.5-5.6 IS USM, EF 50 F/1.8 STM
430EX III-RT & 600EX II-RT
10-10-2022 04:02 PM
see this picture
My lens is usm
10-10-2022 09:33 PM
Have you tried removing the lens and re-installing it to clean the lens contacts? Do you have another lens to try?
10-11-2022 12:38 AM
Yes i cleaned the lens but i am out of my city
and I don't have another lens with me
10-11-2022 06:56 AM
Is there a camera store near you where you could try a lens?
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.