06-08-2020 03:52 PM - last edited on 06-09-2020 08:53 AM by Danny
Please, help! How to solve err70 on Canon 80d? It occurs only when the camera is set in video mode. The camera shuts down after about 2 minutes and shows that error. It happens with my Canon 17-55, my Canon 18-55 and my tamron 70-200 g2. No problems with my Tokina 11-16 instead... With 5dmk4 I have no problem at all with every lens.
12-08-2020 11:58 AM - edited 07-17-2022 10:38 AM
"I have the problem with 4 out of a 5 lenses kit. I have had it before and after 1.0.2->1.0.3 update. I have it connecting camera to usb 3.0 pc port as well as if I connect it to usb 2.0 pc port"
OK now you know what it is not! Did you rule out overheating? If that is, not overheating, then you need to send it in for Canon service.
12-08-2020 11:56 AM
@AlexTischer wrote:I thought I was in the Eos Webcam Utility section when I wrote this post. I have this problem only when using the camera as a webcam through the official software.
It sounds like you have an issue with the camera. I suggest that you contact Canon Support.
10-06-2021 09:48 PM
10-01-2021 07:35 AM
Hi I'm from the Philippines and I got the same issue.
But here's the behavior:
- By using OBS, it stops functioning in less then 2mins. If you would noticed, the camera blinks as if the USB cable is pulled out
Here's what I did:
- Same cable, I used some cheap USB hub 3.0 and it resolves the issue. If not, be sure to unistall the webcam utility and install the EOS utility. If you can control your camera using the app, it means your camera is still working properly. If not, the app will not function properly.
Let me know how it goes on you.
10-01-2021 07:58 AM
Thanks for the tip!
Unfortunatelly I cannot test it anymore - I sold all of my Canon gear and switched over to Sony. 🙂
10-06-2021 09:48 PM
10-07-2021 03:53 AM
10-07-2021 08:01 PM
10-08-2021 02:50 AM
07-16-2022 01:07 PM
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.