03-14-2023
06:10 PM
- last edited on
03-14-2023
06:19 PM
by
Tiffany
I have a 5D with a brand new, fully charged battery and a brand new memory card. Turn on the camera, go to format and the camera states that it is busy formatting. It’s been that way for 20 minutes. I turned off the camera, removed the battery and memory card, return them, turn the camera back on and start the formatting again and it still says busy. What am I missing. Thank you for any help with this issue.
03-14-2023 06:47 PM
Have you tried using a different CF to see if your current one is faulty.
03-14-2023 07:18 PM
No I have not but will give it a try. Thanks 👍
03-14-2023 07:22 PM
Also inspect the pins inside the camera with a flashlight to make sure there NOT bent either.
03-14-2023 07:26 PM
5D needs firmware 1.1.1 to be able to use larger CF cards
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.