08-28-2024
08:24 AM
- last edited on
08-28-2024
08:26 AM
by
Danny
I just got a Canon 5D Mark IV, and while I've watched the tutorial video from Canon (Canon EOS 5D Mark IV Tutorial-Tips and Techniques on YouTube (https://www.youtube.com/watch?v=kM4wGdZzvps)), I'm having trouble displaying the AF points selection/setting page on the LCD screen. I can see it in the viewfinder, but not on the LCD. Can anyone guide me through this?
I previously owned a T6i, so this one feels a bit intimidating!
08-28-2024 11:33 AM
What display do you have showing on the LCD normally, if it is blank then pressing the AF selection button will not show the AF points on the rear screen. Press the INFO button to change the LCD display to show the "quick control screen" where you can see shutter speed, aperture and ISO plus other settings. This is the display shown on the camera in the video. Then when you press the AF selection button the LCD will show the AF point selections as in the video.
08-28-2024 12:56 PM
Yes, I was operating from a blank screen. I will try this when I get to the camera and report on my experience.
Thanks!
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.