07-22-2016 11:04 AM
Dropped the camera and now it has a crack about one inch long next to the "Canon" logo and below the flash attachment. The camera is working fine but I am gong to send it to Canon for a check. My question is, Any concern that humidity might buit inside the camera because the crack if I decide not to fix it?
07-22-2016 01:15 PM
Cracks in the body are not good. I would get it repaired. Use your best judgement. If Canon repairs it, they will give the camera a thorough going over. The camera should seem as good as new when you get it back.
07-23-2016 08:04 AM
I'm not sure how they could repair a cracked magnesium body short of replacing it. Maybe I'm wrong.
07-23-2016 10:49 AM
"Any concern that humidity might buit inside the camera because the crack if I decide not to fix it?"
Now both of us know it has to be fixed. Don't we? It is too nice and expensive of a camera to not repair it. It isn't going to be cheap to fix. I will assure you that humidity is not the only thing that will get in where it shouldn't be.
07-25-2016 10:02 PM
11/20/2025: New firmware updates are available.
EOS R6 Mark III - Version 1.0.1
EOS R5 Mark II - Version 1.2.0
PowerShot G7 X Mark III - Version 1.4.0
PowerShot SX740 HS - Version 1.0.2
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
07/24/2025: New firmware updates are available.
07/23/2025: New firmware updates are available.
7/17/2025: New firmware updates are available.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.