07-22-2016 11:04 AM
Dropped the camera and now it has a crack about one inch long next to the "Canon" logo and below the flash attachment. The camera is working fine but I am gong to send it to Canon for a check. My question is, Any concern that humidity might buit inside the camera because the crack if I decide not to fix it?
07-22-2016 01:15 PM
Cracks in the body are not good. I would get it repaired. Use your best judgement. If Canon repairs it, they will give the camera a thorough going over. The camera should seem as good as new when you get it back.
07-23-2016 08:04 AM
I'm not sure how they could repair a cracked magnesium body short of replacing it. Maybe I'm wrong.
07-23-2016 10:49 AM
"Any concern that humidity might buit inside the camera because the crack if I decide not to fix it?"
Now both of us know it has to be fixed. Don't we? It is too nice and expensive of a camera to not repair it. It isn't going to be cheap to fix. I will assure you that humidity is not the only thing that will get in where it shouldn't be.
07-25-2016 10:02 PM
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.