04-30-2024 04:49 PM - last edited on 05-01-2024 09:31 AM by Danny
I was used my camera before 3 days...after that I had a event tomorrow so that I am charging all my execories...and As natural I thought to check my memory space....i plugged in the battery and card...but suddenly it didn't on...and i tried with other batteries,memory cards several times it didn't work...
05-02-2024 07:50 PM
Hello Sanvie430,
Try cleaning the battery contacts with a clean, soft microfiber cloth. Dirty contacts could cause an issue like this. Do not use any kind of solution when trying this. Let's try the camera with just a fully charged Canon battery in. Remove the lens, memory card and anything on the hotshoe. If the issue persists, then you would need to send the camera into our factory service center.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.