04-23-2020 01:31 PM
I have a Canon Rebel t5 (not t5i). I have the proper HTC 100 cable to connect the camera body to an external monitor. However, I don't know how to set my external monitor to be the viewfinder for me while I'm trying to take photos. Right now I can use it while recording video; i can see the live feed. But it doesn't work on any of the photo settings. It will display the photo once I've taken it but I want to set up the shot using my monitor. Esp. because my camera is in positions that a person can't physically reach to use the camera's built in viewfinder.
Any help will be greatly appreciated
04-23-2020 03:09 PM
You can only use the monitor in live view. With the mirror down - like when using the viewfinder - no light can get to the sensor.
04-24-2020 05:18 PM
Thanks so much for the reply! So, my next question is, can you explain how to do this? If firstname.lastname@example.org
04-24-2020 06:48 PM
Thanks so much for the reply! So, my next question is, can you explain how to do this? [ REMOVED ]
Basically, you want to use the EOS Utility from Canon. Canon's DPP software can also perform tethered shooting. How this is done is described in the User Manuals for each application. These are available from the Product Support Page for your camera.
04-24-2020 08:59 PM
This is so helpful! I am going to find the Utility app online and download it. My old laptop is dead and, with it, all the old programs. So, I'll figure this out and go from there. Thank you!
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 126.96.36.199
PowerShot SX420 IS - Version 188.8.131.52
PowerShot 620 HS - Version 184.108.40.206
PowerShot SX720 HS - Version 220.127.116.11
PowerShot G1X Mark III - Version 18.104.22.168
PowerShot G7X Mark II - Version 22.214.171.124
PowerShot G9X Mark II - Version 126.96.36.199
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.