cancel
Showing results for 
Search instead for 
Did you mean: 

Connecting T3i To Mac???

gapfilmvideo
Apprentice

So I recently got a Canon EOS Rebel T3i and was wondering how to upload videos to my Mac?? I plugged in the USB but it will not show up. Do I need to download anything??

Thanks,

Cate

1 REPLY 1

TCampbell
Elite

By default, if you connect the camera to the Mac via the included USB cable AND power up the camera (that's an important step), then the Mac will usually launch iPhoto.  You can actually control what the Mac launches or configure it not to launch anything at all.

 

I configured my Mac not to launch anything at all and I use Aperture to import, manage, and adjust my photos.

 

You can manually launch a photo app and tell it to import and that will work too.  

 

This assumes the Mac sees the camera attached to the USB port.  Are you connecting the camera directly into the Mac or are you using a USB hub?

 

 

Tim Campbell
5D III, 5D IV, 60Da
Announcements
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/22/2022: New firmware version 1.2.0 is available for PowerShot PICK
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM