10-09-2024 01:37 PM
My camera willl NOT allow the built in flash to open. I’ve cleaned the hot shoe but it still comes up as “accessory attached”. Someone please help me if you can!🙏
10-09-2024 02:05 PM - edited 10-09-2024 02:05 PM
Hi and welcome!
Looking at the hot shoe, has it been impacted by anything? In the first image the right-hand frame has a decent size dent in it and, the whole frame looks a tiny bit out of alignment.
Also, look at the springs inside each channel. They should both be like the one on the left (as per the last image), if one is not it may be that the spring is not completing a contact and thus makes the camera believe there is something in the hot shoe.
10-10-2024 08:59 AM
Referencing for future use if needed.
11/20/2025: New firmware updates are available.
EOS R6 Mark III - Version 1.0.1
EOS R5 Mark II - Version 1.2.0
PowerShot G7 X Mark III - Version 1.4.0
PowerShot SX740 HS - Version 1.0.2
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
07/24/2025: New firmware updates are available.
07/23/2025: New firmware updates are available.
7/17/2025: New firmware updates are available.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.