10-27-2020 10:13 AM
Hi new owner of a Canon EOS RP. Recently upgraded from a Canon 6D. I've been researching and testing out hss on the RP. Although, post firmware version, top banding has been fixed but I still see striped banding across the image at shutter speeds 1/1000th and above. Is there a workaround for this? I'm using the Godox flash system: Xpro-C for the trigger, 2 AD200s and an off-brand speedlite with the X1R-C as a receiver for the speedlite.
10-27-2020 10:33 AM - edited 10-27-2020 10:51 AM
Does the exact same external flash setup work on the 6D without the striped banding?
Please show us an example of the striped banding. Could it be a from CFL or LED lighting?
Examples of CFL and LED lighting banding:
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 18.104.22.168
PowerShot SX420 IS - Version 22.214.171.124
PowerShot 620 HS - Version 126.96.36.199
PowerShot SX720 HS - Version 188.8.131.52
PowerShot G1X Mark III - Version 184.108.40.206
PowerShot G7X Mark II - Version 220.127.116.11
PowerShot G9X Mark II - Version 18.104.22.168
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.