02-02-2017 04:19 PM
The camera turns on without an sd in and when i use the sd the screen stays blank with no sounds from the shutter moving
Solved! Go to Solution.
02-02-2017 07:43 PM
There is also a switch in the camera that senses thew card. If that is malfunctioning the camera won't know a card is installed. But it should give you a "No card" message on the LCD.
Give Canon a call at 1-800-OK-CANON.
02-04-2017 08:18 AM
I sent the camera to canon
02-02-2017 08:40 PM
@kvbarkley wrote:Look in the card slot and see if there is anything that might be preventing the card from connecting. If there is, you can try blowing it out.
Slot is clean
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.