08-30-2023 06:28 PM
Hi, so my friend tried to put the cf card in me camera sideways and ended bending a pin. the rest of the pins are there but one pin where it went into the camera. now my camera wont turn on. can you help me please
08-30-2023 06:44 PM
You’d have to be very careful if attempting to repair yourself as rebranding the bent pins will risk breaking them. May need to look at a camera repair place.
08-31-2023 10:52 AM
Unless the bent pin is shorting to another pin the 5D2 should turn on whether it has a CF card in it or not. Try turning it on with out the CF card installed If it doesn't come on, it is not the fault of the bent pin. The camera needs service and Canon doesn't service the 5D2 anymore but private shops do.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.