06-28-2016 02:10 AM
I just go a canon 5d mark II from ebay and a new 85 mm f/1.8 lens from adorama. However I can't control aperture in Manual (M) model even after turning the on/off knob to the highest level (marked by a white line). is there any thing wrong with the camera or with the lens? Thanks.
06-28-2016 10:07 PM
@jrhoffman75 wrote:If you do what the attached image says does anything happen - i.e.do you dial in Exposure Compensation?
Nothing happens when I follow the steps in the above image.
If so, then the switch is working and the dial is sending signals to the camera.
Do this:
And this:
I did all of the steps above last night (several times) but it didn't work.
I'm going to return it to the seller (ebay) and try to get a new one. Thanks everybody for help!!!!!
TP
06-29-2016 08:21 AM
"I'm going to return it to the seller (ebay) and try to get a new one. Thanks everybody for help!!!!!"
My advice is forget about purchsing more merchandise from the seller. Look at the example that has already been set. I don't think that there is really anyway that an EOS 5D Mark II can be accurately described as "new" today. I understand the fact that I shouldn't be so literal.
But, the fact remains that the 5DII hasn't been sold as "new" for several years. If a vendor is claiming and sellling 5DII cameras as "new", then that would give me pause, a pause just long enough to "hmph" and then move on.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.