02-09-2018 09:29 AM
Hi. I have a Canon 80D. I was viewing pictures on the camera through my iPhone that was wirelessly connected and running the Canon Camera Connect application. However, when I decided that I was done viewing, I absentmindedly turned off the wifi of my iPhone by going into settings on my iPhone instead of disconnecting the Canon Camera Connect app. Could this have damaged the memory card and/or the camera since as I understand it, I might have interrupted the camera and the card while it was reading data?. Is there a way to check if the card and/or camera software got corrupted? Thanks in advance for your inputs.
Solved! Go to Solution.
02-09-2018 09:54 AM
The camera is fine. The card is only a problem if it was writing to the card when it got disconnected, which is unlikely. If you want, you can make sure you have all the pictures saved off the camera and reformat the card.
02-09-2018 09:54 AM
The camera is fine. The card is only a problem if it was writing to the card when it got disconnected, which is unlikely. If you want, you can make sure you have all the pictures saved off the camera and reformat the card.
02-15-2018 09:24 AM
03/02/2023: New Firmware Updates Are Available:
EOS R7 - Version 1.3.0EOS R10 - Version 1.3.02/07/2023: New product announcements!
EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STMCanon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.