cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

80D for PAL Video at 25 and 50 fps jittery problems

lefteris
Contributor

Hi there,

I bought a 80d some months ago and I have a specific problem which I do not know how to solve it.

I bought this camera for videos in PAL mode.

 

When I'm filming something, especially cars on the road, at 25fps or 50fps the produced video is very jerky!

The same problem also when I'm trying a very short move by hand or with travelling equipment.

BUT

When I'm filming the same road with cars at 30fps or 60fps the produced video is very smooth. Especially at 60fps the footage is amazingly smooth. Unfortunately I did not buy that camera for videos in NTSC mode!

 

Shutter speeds: 25/50, 50/100, 30/60, 60/125

 

Any idea?

12 REPLIES 12

I concur with kvbarkley. Canon cameras can switch video between PAL and NTSC.

 

When recorded in PAL, playback on a PAL device.

If recorded in NTSC mode, playback on NTSC device.

 

Sorry, about the bum steer. I never use my still cameras as a video recorder ...

 

Paul

 

What? Canon cameras have an option to switch between PAL and NTSC.

 

Yes.
PAL system mode 25fps, 50fps.
NTSC 24, 29.97, 59...
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.