cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

60d unlock button

Tsleel2811
Enthusiast
Hey guys I'm new to this forum but new to my camera although something is bugging me and I can't figure out what's wrong. My Aperture control locks up in manual mode. I can only control Shutter speed and iso. The unlock button unlocks it but I don't want to have to unlock it every time I want to use it. It never happen before. I've been using the camera for a bout 2 years
1 REPLY 1

diverhank
Authority

@Tsleel2811 wrote:
Hey guys I'm new to this forum but new to my camera although something is bugging me and I can't figure out what's wrong. My Aperture control locks up in manual mode. I can only control Shutter speed and iso. The unlock button unlocks it but I don't want to have to unlock it every time I want to use it. It never happen before. I've been using the camera for a bout 2 years

It appears that you have inadvertently enabled the Lock option in the menu (yellow wrench # 2).  The default is disable.  You can go in and change this to disable or do a reset to default.

 

Capture.JPG

================================================
Diverhank's photos on Flickr
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.