cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

5D MKIII - Min Shutter Speed wit Auto ISO in AV Mode

Buffalosoldier
Apprentice

When setting min shutter speed and auto ISO in AV, camera overides the min shutter speed when the maximum ISO is reached to obtain proper exposure. Not allowing to underexpose and image.

 

Is this a problem with my camera, software bug or deliberate action? 

 

If this is the way it should be? why would the camera allow to set the limit if it overides it without asking?

 

In 99% of the situations I would prefer to have underexposed and noisier image compared to blurry image. Hence I would like to limit the shutter speed. 

 

Before anyone wil ask the question about the other settings I will add that the safety shift is switched off. Camera is running on the latest firmware.

 

Have anyone else experienced similar isue? Any solutions?

 

Thanks,

 

Buffalo

 

 

 

 

 

 

1 REPLY 1

Buffalosoldier
Apprentice
It must be canon assuming that the blurry image is better than high noise according to this read: https://books.google.ie/books?id=kXQKAAAAQBAJ&pg=PA242&lpg=PA242&dq=EOS+5D+Mark+III:+minimum+shutter...
Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!