cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Canon 200 f/2 manual focus

sbogar
Apprentice

Hi all,

 

This question is related to the Canon 200mm f/2.0 lens.

Does focusing work by moving the black rubber focusing ring

if the lens is in manual focus mode AND IF there is no

canon body attached to the end of the lens (i.e. it is not

under current/power)?

Say I want to project a source in an optical lab with this lens onto a detector,

and want to use it in fully manual focus mode.

 

This did not work with the Canon 200 f/1.8 AF lenses.

 

Regards,

Bogar

 

5 REPLIES 5

ebiggs1
Legend

On external focusing Canon lens, the focus works when set to MF whether it is attached to the camera or not. On internal focusing lenses, it is not readily apparent. Because they don't change their length. I would guess they will, however, since the MF just connects the focus ring to the lens mechanically.

EB
EOS 1DX and 1D Mk IV and several lenses!

Hello ebiggs,

 

Thanks for your response.

 

You say "on external focusing Canon lens" the focus works when set to MF.

 

The Canon 200 f/2 counts as an "external focusing lens"?

 

 

I am asking this, because the manual focusing definitely does not work

on the older Canon 200 f/1.8L USM lens, even when turned to MF mode, but

without a Canon camera attached. So I guess with your definition the 200/1.8 is

not an external focusing lens. When a Canon body is attached to the 200/1.8,

then the MF works fine, but one needs to power up the lens and its CPU so that

it converts the motion of the rubber ring into electronics, and ultimately motion

of internal lens elements.

 

I understand that this is not a standard use of the lens, so hoping that

Canon afficionados will know this. Clearly, the lens does not change

its outer dimensions while focusing. But one can see the focus changes

when projecting e.g. a landscape on a piece of white paper.

 

Best regards,

Bogar

 

 

 I do not have this lens but I have a photographer buddy that does, so I asked him. Here is what he said;

 

The internal-focusing lens does not extend and does not rotate the front element as most fixed focal length lenses do not extend. It has FTM (Full Time Manual) focusing.

 

But he did not know whether it worked without the camera attached.

EB
EOS 1DX and 1D Mk IV and several lenses!

David
Enthusiast

The Canon EF 200mm f/1.8 was a 'focus-by-wire' lens (just like the current Ef 85mm f/1.2) and can only be manual focused when connected to an EOS body. The EF 200mm f/2 lens does not share this feature and can be manual focused just like a normal lens.

Thanks for the solution! When I get one of these lenses, I will report

back to confirm that this is indeed the case!

Regards,  Bogar

 

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.