05-07-2019 12:20 PM
I have a Canon 7D and used the Canon Lens 17-40mm f4L every day. This lens never fell or was hit. There is no visible why the lens has stopped snapping into the camera. It's like there's something blocking the fit. I can use other lenses in 7D as usual. I wonder if anyone has gone trough something similar and has managed to solve this problem; Thanks!
05-07-2019 02:21 PM
Look for a piece of debris perhaps stuck in the depression that the locking pin snaps in.
05-07-2019 08:06 PM
Also verify that all of the screws are tight.
05-07-2019 08:09 PM
I forgot to mention - also verify that the lens lock button on the camera moves freely and isn’t sticking.
05-08-2019 10:58 AM
"...also verify that the lens lock button on the camera moves freely and isn’t sticking."
Hmmm, doesn't sound likely does it?
"I can use other lenses in 7D as usual"
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 184.108.40.206
PowerShot SX420 IS - Version 220.127.116.11
PowerShot 620 HS - Version 18.104.22.168
PowerShot SX720 HS - Version 22.214.171.124
PowerShot G1X Mark III - Version 126.96.36.199
PowerShot G7X Mark II - Version 188.8.131.52
PowerShot G9X Mark II - Version 184.108.40.206
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.