02-19-2014 07:57 PM
02-19-2014 10:10 PM
02-19-2014 11:48 PM
I normally do not buy non-OEM parts but in this case I opted for an Opteka ET-65 III hood which fits the 85 1.8 perfectly and it's only $6. I second the recommendation not to use a filter.
02-19-2014 10:10 PM
02-19-2014 11:48 PM
I normally do not buy non-OEM parts but in this case I opted for an Opteka ET-65 III hood which fits the 85 1.8 perfectly and it's only $6. I second the recommendation not to use a filter.
02-20-2014 06:56 AM
OK thanks guys!!!!
02-20-2014 11:26 AM
Now for a third opinion, get this filter.
I have yet to see anyone, except pixel peepers, show me a protective filter harms a photo. You have a decent lens so is it worth it to you to add a small amount of insurance for $28 bucks?
Of course, being a die hard Canon user, I recommend you get the real Canon hood, also.
02-20-2014 08:47 PM
Well I did get some filters that degraded the kit lenses. But I am open to anything that protects my lens?
02-21-2014 09:16 AM
Oh, I did not say it was not possible to get and use a crappy filter. The one I suggested for you is a very good filter.
Although I no longer support myself with a camera, I never had a person say to me, "If only you hadn't shot that with a filter on your lens."
That filter is cheap insurance. Even if it only serves to keep the front element clean. And on the same plane, a hood is one of the least used but one of the items that has the biggest effect on your pictures.
Use both!
02-21-2014 10:23 PM - edited 02-21-2014 10:26 PM
what about the tulip hoods everyone has?
02-22-2014 01:27 AM - edited 02-22-2014 01:28 AM
Tulip hoods are not needed for a short telephoto prime like the 85mm. They are used on wide angle and zoom lenses mostly. Especially steer clear of the "generic" tulip hoods. They screw into the lens using the filter threads and are easy to misalign, and won't give as good coverage of the lens. They just "look cool".
Get any of the available correct ES65 III hoods. They fit and work well.
As to the protection filter, well IMO you could just save your money. Actually, I do have "protection" filters (mostly B+W and Hoya) for all my lenses. But they stay in my camera bag unless I'm shooting something that actually requires protection, such as out in a sand storm, right at the edge of a race track, paint ball, etc.
I do not leave a protection filter on my lens all the time. I have seen many examples of the problems they can create. Heck, I've had to deal with the issues they caused at times when second shooters used filters without me being aware (I try to remember to check their lenses and ask them to remove them).
If you want a filter for occasional use, or if using it all the time makes you feel better and you don't mind some compromise in image quality, get one.
But, sorry Canon, I'd skip that one. Their filters are decent glass, but not multi-coated and tend to be quite overpriced. I would guess they're outsourced from Kenko or Tiffen. You can get a single coated or uncoated 58mm UV filter from either of them for about $16.
If you must, I'd recommend to get a high quality 58mm UV or Clear multi-coated Hoya Pro 1, HD, HD2 or HMC; or a B+W Pro MRC or Pro MRC Nano; or a Marumi multi-coated (EXUS, I think); or a Heliopan SH-PMC. Those are all high quality and multi-coated, that I'm familiar with. I'm sure there are some other good quality, multi-coated.
But keep in mind that any filter has some effect on your images. It can be very little with a quality filter under good conditions, or it can be a lot when there is strong specular light striking it, and a thin piece of glass really doesn't offer much physical protection. The nice, deep hood offers more physical protection than any filter ever could. In fact, when using a filter it's even more important to use the lens hood, to protect filter and lens from both oblique light and hard knocks.
***********
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM
02-22-2014 05:25 AM
Ahhhh so the filter drama thickens. What a good read. I will get a hood and look out for some cheaper filters for protection.
Alway a pleasure to hear from experience photographers. Thanks to all of you.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.