08-10-2013 08:48 PM
our canon mx892 will not print due to error U052. i followed all of the suggested steps for this problem related to an MX700 but it did not correct the problem. now what?
Solved! Go to Solution.
08-13-2013 01:46 PM
I have replaced the printhead, following your instructions, several times but the error message still occurs and will not let me even use the menu button. The red light on the "M" ink cartridge blinks slowly instead of staying on solid. By the way, your instructions left out a step: remove all the ink cartridges before lifting the print head lock lever.
This error message came on as i was using the printer to print and i had not removed the print head or replaced any cartridges.
06-07-2015 08:24 PM
06-16-2015 10:52 PM
I followed your instructions 20 times already and it does not work. Thanks for nothing. So, now what should I do.
09-01-2015 12:39 PM
10-21-2015 10:41 PM
I have tried all of the steps listed in previous posts and nothing has helped. Any other suggestions? (Besides purchasing another brand of printer?)
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.