03-24-2016 07:20 AM
I have a MP560 printer that is leaving a smudge on everything I print. It is evanly spaced the full lenght of the page. Here is a scan of one of my printed pages. What do I need to do to clean the printer?
03-26-2016 09:41 AM
Hello.
Do you happen to be using a speciality media type other than plain paper? If so, try changing the media type setting before printing.
If this issue occurs on plain paper, try the following adjustment to see if we can resolve the issue:
1. Close all programs that are open.
2. Click Start and open the Control Panel.
3. Open Printers or Devices and Printers.
4. Right-click the MP560 and choose Preferences or Printing Preferences.
5. In the Maintenance tab, click the Custom Settings button.
6. Check the box to prevent paper abrasion, then click OK.
7. Click Apply and OK.
Once this has been done try printing to test the adjustment.
If the issue persists, find more help at Contact Us.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.