02-03-2015 11:10 AM
I have a mg3200 wireless printer for less than a year! I hate it!!! sometimes it will print usually it will not. you have to sit and babysit it. Its like it cant grab the paper..... and just gives and "E" error message. any help?
02-06-2015 03:26 AM
Hi lesalee,
To try and resolve the issue, with a flashlight or other bright light, please check the paper feed area of the printer and verify that there are no paper jams or obstructions in the printer that may be causing the paper not to feed. If you still experience the same issue once this has been verified, performing a roller cleaning may help. To perform a roller cleaning, please follow the steps located at the link here.
If you still experience the same issue after performing at least three roller cleanings on the printer, or if you are unable to perform the roller cleaning due to the error, the printer may require servicing. Please call or email us at one of the methods on the Contact Us page for further assistance.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.