04-03-2022 01:24 PM
I recently Updated my Mac to Monterey and am running 12.3.1
My printer is the ip7220 with 184.108.40.206 for the driver. It was printing fine before the update and now when I try to print, it just runs the paper through like it is printing, but no ink is being put down. Test print also was not working. I don't see a driver for Monterey listed. Will there be an update to this driver?
04-04-2022 08:36 AM
That seems to be the correct driver.
Try reinstalling the driver and re-adding the printer. Be sure it is the IJ Series version of the printer.
04-05-2022 10:16 PM
Thanks. I tried removing the printer and re-adding the printer with that driver. I am getting the same result.
04-06-2022 06:28 AM
Give Canon a call at (866) 261-9362
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 220.127.116.11
PowerShot SX420 IS - Version 18.104.22.168
PowerShot 620 HS - Version 22.214.171.124
PowerShot SX720 HS - Version 126.96.36.199
PowerShot G1X Mark III - Version 188.8.131.52
PowerShot G7X Mark II - Version 184.108.40.206
PowerShot G9X Mark II - Version 220.127.116.11
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.