12-31-2020 03:21 AM - edited 12-31-2020 03:23 AM
Hi there
I was gifted a used i80 printer and after trying to clear the printheads was having success with only 2 of the colors. So I decided to buy a replacement printhead off of ebay for what seemed to be the going price of $20. Hoping it will do the trick but wanted to ask if that is likely to cure the problem. Got new cartridges wich I will be using.
12-31-2020 09:02 AM
Greetings,
Used equipment, maybe.
It's impossible for us to say with certainty what could, or if a new part would fix it.
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
07-13-2021 04:41 PM
Canon i80, has ink carts, appears ready to print but no go.
Upon starting:
1) carraige moves from far right to far left then settles into 'ready' position
2) paper is taken up / moves into position
3) yellow light flashes 3 times
Manual says 3 lights = paper jam but there is no paper in the mechanism other than the intake tray as described above.
Tried unpluggin for 1/2 hour then starting up - same issue.
Can not print a self test page by holding down the re-set because the yellow flashing light..
Assistance appreciated!
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.