03-05-2018 12:40 PM
Hi I have a very new Pixma 922. When printing on disc, the printer is causing what I'll call roller tracks on the cd surface. There are at least two . They are parralel lines less than 1/16" thick, spaced about 1 1/2" apart marring the disc surface. I set the paper abrasion on, no difference. Thanks
05-07-2018 12:36 PM
Hello.
The issue may be related to the discs that you are currently using. Try using a different brand of discs to see if the results improve.
If you continue to have difficulties, find more help at Contact Us.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.