03-05-2018 12:40 PM
Hi I have a very new Pixma 922. When printing on disc, the printer is causing what I'll call roller tracks on the cd surface. There are at least two . They are parralel lines less than 1/16" thick, spaced about 1 1/2" apart marring the disc surface. I set the paper abrasion on, no difference. Thanks
05-07-2018 12:36 PM
Hello.
The issue may be related to the discs that you are currently using. Try using a different brand of discs to see if the results improve.
If you continue to have difficulties, find more help at Contact Us.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.