cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

copying prints vertical black line

Snap65
Apprentice

When copying the print has a black vertical line down the left side ?

2 REPLIES 2

jrhoffman75
Legend
Legend

Not a lot of info to go on, but in some printers the glass is slightly larger than Letter size. Does your printer have an icon where the paper corner should be aligned?

John Hoffman
Conway, NH

1D X Mark III, M200, Many lenses, Pixma PRO-100, Pixma TR8620a, Lr Classic

Hello I have the same issue , When printing everything is fine but when scanning or photocoping I get a thick solid black line approx 1/2 inch down the side of the doc . I have cleaned , I have factory reset , I have updated firmware , but still the same . you can see the black line on the scan preview and it doesn't matter if you move the paper to a different spot on the scanning bed or it you completly cover the scan bed with multipul sheets of paper . the settings are set to A4 for an A4 sheet , I can send you a photo of the printer preview lcd screen with line on it , if you need it . ty 

Avatar
Announcements