cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Windows 11 computer won't detect Pixma MG2220

sja
Contributor

I'm trying to install an MG2220 printer on a new computer running Windows 11.  The system seems to detect it as a scanner but not as a printer.  I've downloaded the Windows 11 driver from the Canon web site and followed the instructions precisely, but keep getting the message that the printer is not detected.  I've verified the USB connection and tried using different USB ports.  I'd greatly appreciate your assistance.

2 REPLIES 2

Patrick
Product Expert
Product Expert

Hi sja,

Reinstalling will resolve this issue. To do this, please follow these steps:

1. Press the Windows key on your keyboard and the letter R, then let both go.

2. In the Run window, please type CONTROL PANEL and click OK.

3. Click on View devices and printers (or Devices and printers, depending on your view).

4. Right click the Canon MG2200 series and left click on Remove device. Repeat until all MG2200's are removed.

5. Disconnect the USB cable.

6. Click Close to close that window.

7. In the upper left corner, click on Control Panel (or the Back button).

8. In Control Panel, click on Uninstall a program (or Programs and features, depending on your view).

9. Click once on "Canon MG2200 series MP Drivers" and then click Uninstall at the top.

10. Follow the on screen prompts to uninstall the driver. When you click Complete, the driver is uninstalled.

11. Once done, please reboot your computer.

When your computer restarts, we will reinstall:

1. Please use the following link:

https://www.usa.canon.com/internet/portal/us/home/support/details/printers/inkjet-multifunction/mg-s...

2. Click the Select button next to "MG2200 series MP Drivers Ver. 1.01".

3. Click the Download button. The drivers will download.

4. Once the download is complete, open your downloads folder. To access this, press CTRL and J, then let both go.

5. Double click "mp68-win-mg2200-1_01-ejs.exe" to begin the installation.

6. Follow the on screen prompts to reinstall, reconnecting the USB cable when prompted by the installation.

Once the installation has completed, please attempt to print.

 

 

 

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Thank you, Patrick.  I did try re-installing and that did not work.  The computer manufacturer was able to help me by installing the My Printer troubleshooting software on the Canon site, which I had not noticed. Running that did the trick.

Announcements
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.