cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

TS3122 stopped working

QWERTYUIOP
Apprentice

I have a TS3122 printer that printed 2 pages, started making a gear skipping sound, and now the oarnge lightning bolt error light on printer, is on. I have cycled the power, andput in new paper. 

Its like the end stop sensor isnt working anymore, so it cant calibrate 

 

Is this thing broken? After 2 pages? LOL

 

What causes the orange light?

 

please dont ask me to reinstall. It printed 2 pages. It -is- connected

this is a hardware failure

 

 

 

1 ACCEPTED SOLUTION

QWERTYUIOP
Apprentice

So it turned out to be a paper jam. It threw the E03 code

You have to look deep into the paper loader to see the jammed piece of paper

A needle nose pliers was barely small enough to reach in and grab the jammed sheet

Seems to be working now

View solution in original post

2 REPLIES 2

Patrick
Product Expert
Product Expert

Hi QWERTYUIOP,

 

It is recommended that you contact one of Canon's Technical Support Representatives. To contact a Technical Support Representative, please use the link below:

http://Canon.us/ContactLI

QWERTYUIOP
Apprentice

So it turned out to be a paper jam. It threw the E03 code

You have to look deep into the paper loader to see the jammed piece of paper

A needle nose pliers was barely small enough to reach in and grab the jammed sheet

Seems to be working now

Announcements