cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

TS302 Not Printing in the Center

mooseisloose
Apprentice

I've printed nearly a thousand pages on this printer with zero issues until now. I mainly print PDF sewing patterns so it's very important that the pages are centered and printing at the correct scale. My most recent documents are showing up off center in the print preview box and printing as shown on the screen. The files are formatted for US letter. If I change the settings to "Fit," the page will be centered but the scale goes up to 107%. This is happening across all documents. I don't remember changing any settings so I'm very confused. 

One other thing to note: The pages with instructions print out fine but the pages with the actual pattern (as shown in the screenshot below) are the ones with the problem. 

Very grateful for any advice!

 

Printer issue.jpg

1 REPLY 1

ArthurJ
Product Expert
Product Expert

Hi,

If everything else prints fine and the issue is just with the pattern, it may be a issue with the file itself that has that pattern. 

You can also try completely removing the printer from your computer and then reinstall it. After the reinstall, restart your computer and try to print again. 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

 

Announcements
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.