01-14-2024 06:37 PM - edited 01-14-2024 07:10 PM
As in the linked photos, there's a repeating pattern of blue characters / smears "riding along" the edges of intended printed objects.
I say "riding along" because the angle of the block of unwanted characters/smearing changes depending on the slope of the object edge.
We did a print head cleaning. Also removed printhead and checked for ink buildup, and gave it a manual cleaning.
Any help would be appreciated.
01-24-2024 12:50 PM
Hi,
After you performed the nozzle cleaning, did you print a nozzle check? If so, could you attach a picture of the nozzle check to your reply.
We look forward to hearing from you.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.