11-16-2014 04:05 PM
My Pixma MX922 gave me a low ink message for both black cartridges and began printing spottily, which itself was unusual behavior. I changed both cartridges, and now it won't print at all. It's not giving me any error messages at all, and otherwise behaves normally, but there's no print on the page. Help!
Solved! Go to Solution.
11-19-2014 02:10 AM
Hi ChickenLittle,
Performing at least one cleaning and two deep cleanings on the printer may resolve the issue. To do this, please follow the steps located at the link below:
Performing Print Head Cleanings
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
11-19-2014 02:10 AM
Hi ChickenLittle,
Performing at least one cleaning and two deep cleanings on the printer may resolve the issue. To do this, please follow the steps located at the link below:
Performing Print Head Cleanings
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.