07-13-2021 10:49 PM
I just bought a tr7520 pixma printer. I tried printing 2" stickers and it prints all way at the top and not in formatted print area of the sticker sheet. If I print them on plain paper, they print as fomatted. They only go off the format when I try to print them on the sticker sheet.
Is there a setting I need to change some where to get them to print properly? I use an iMac desktop. The printer is connected with a cable, not via wifi.
Solved! Go to Solution.
07-15-2021 09:49 AM
So thanks for all the no answers or suggestions. I figured it out myself. For anyone elsewho may be having the same issue here is the answer -
Use the rear feed tray. It will keep the label sheet formatting and print your labels in the label print area.
07-15-2021 09:49 AM
So thanks for all the no answers or suggestions. I figured it out myself. For anyone elsewho may be having the same issue here is the answer -
Use the rear feed tray. It will keep the label sheet formatting and print your labels in the label print area.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.