07-13-2021 10:49 PM
I just bought a tr7520 pixma printer. I tried printing 2" stickers and it prints all way at the top and not in formatted print area of the sticker sheet. If I print them on plain paper, they print as fomatted. They only go off the format when I try to print them on the sticker sheet.
Is there a setting I need to change some where to get them to print properly? I use an iMac desktop. The printer is connected with a cable, not via wifi.
Solved! Go to Solution.
07-15-2021 09:49 AM
So thanks for all the no answers or suggestions. I figured it out myself. For anyone elsewho may be having the same issue here is the answer -
Use the rear feed tray. It will keep the label sheet formatting and print your labels in the label print area.
07-15-2021 09:49 AM
So thanks for all the no answers or suggestions. I figured it out myself. For anyone elsewho may be having the same issue here is the answer -
Use the rear feed tray. It will keep the label sheet formatting and print your labels in the label print area.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.