cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Setting Pixma MG2522 to start when computer starts

PurpleHaze1959
Apprentice

Is there a way to configure the printer to come on when I turn my PC on instead of manually doing so? Thanks in advance.

1 REPLY 1

Patrick
Product Expert
Product Expert

Hi PurpleHaze1959,

 

You cannot have the PIXMA MG2522 turn on when the computer turns on, but you can have it turn on when you send a print job to it.  This is set in the Maintenance tab of the printer driver.

 

To view more information regarding the "Auto Power" feature of your PIXMA MG2522, please use the following link:

 

http://ugp01.c-ij.com/ij/webmanual/PrinterDriver/W/MG2500%20series/1.0/EN/PPG/Dg-Driver_Maintenance....

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!