cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Print 8x10 image on 8.5x11 Ultra Premium Glossy

JAGAN1111
Apprentice

Recently i bought Canon G7020 Printer. I am trying to print 8x10 photo on 8.5x11 photo paper. but the image is getting enlarged and printed to 8.5x11 full size. I have multiple photo frames with 8x10, so we need photo with 8x10 size and I will cut the remaning waste 0.5*11. 

 

 

 

OS- MAC OS

Tool - Canon Easy-photoPrint Editor

1 REPLY 1

Darius
Whiz

Hi JAGAN1111.

 

The print area control will be found in the Page Handling submenu of the system print window.  This may not be present in the system print window for all programs and apps.  Refer to Apple's support for more information on the print window (https://support.apple.com).

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.