09-09-2014 01:54 PM - last edited on 09-09-2014 02:29 PM by Crista
please email me at [MOD NOTE: e-Mail removed per FORUM GUIDELINES] if you have a solution I rarely check my comments. I have ran all troubleshooting diagnostics that the canon software offers. when i print a test page (as shown in video) it works fine. but when I print anything else that requires black ink....just watch the video please. Thank you.
09-09-2014 02:29 PM
Hi JDeitrich!
Thanks for posting in the Canon Forum! The Forum is not intended for immediate help, but a place to allow for the Community to give you assistance and feedback. If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team.
Thanks!
09-09-2014 03:03 PM
09-23-2014 09:43 PM
10-13-2014 04:39 AM
Hi JDeitrich,
Performing a print head alignment on the printer should resolve the misalignment issue. To perform the print head alignment, please follow the steps located at the link below:
PIXMA MG2120 Print Head Alignment
If you still experience difficulty after performing an automatic and manual print head alignment, please call or email us at one of the methods on the Contact Us page for further assistance.
10-13-2014 05:40 PM
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.