06-30-2022 04:12 PM
In the last few days my printer will only print part of a page. It then expels the paper with only a partial printing. Does anyone know why this is occuring?
07-08-2022 02:59 PM
Hi winkjr,
Let's perform a test of your PIXMA MX470:
1. Load letter-sized, plain paper in the rear Tray.
2. Press the SETUP button.
3. Press the left or right button until [MAINTENANCE] is displayed in the LCD, and then press OK.
4. Press the left or right button until [Nozzle check] is displayed in the LCD, and then press OK.
Does the test page print? Is the black grid at the top of the page complete? Does your test page match the example at the bottom of this post?
What version of Windows are you using?
If you are using a Mac, what version of OSX is installed?
Are you using your PIXMA MX470 wirelessly?
Or with a USB cable?
07-08-2022 05:04 PM
Patrick - thanks for the info. Unfortunately, I'm not at that location currently. I'll try to solution when I'm back there later this month.
Thanks
Wink
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.