01-30-2025
03:41 PM
- last edited on
02-02-2025
01:19 PM
by
James_C
When I try to print, my Canon Pixma spits out a blank piece of paper, and then the orange light flashes twice (indicating no paper?). I continue to reload paper and it does the same thing again.
I recently replaced the ink cartridges, which all clicked into place properly. Please advise on what might be happening, and how I can fix it.
02-13-2025 02:27 PM
Hi cindy98,
First, let's perform a test of your printer.
Please turn your iX8620 and load plain paper into the rear tray.
Next, please press and hold the RESUME/CANCEL button, then release the button when the POWER lamp flashes white 2 times.
Resume is the middle button on your iX6820.
Does the test page print?
Did this answer your question? If so, please click the Accept as Solution button below so that others may find the answer as well.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.