09-23-2024
02:50 PM
- last edited on
10-02-2024
08:18 AM
by
James_C
My PIXMA TR8620a just got replaced after my former machine died. The old one was set up to switch on and print if contacted by my computer, even if the printer was offline. I can't find where to set this up on the new printer.
(Windows 11, wireless LAN connection)
10-01-2024 05:12 PM
Hi ashworthr.
To set the auto power settings, please follow these steps:
1. Please tap the gear icon at the bottom of the display of your PIXMA TR8620a.
2. Please scroll down the list and tap ECO.
3. Tap Energy saving settings.
4. Tap Next.
5. Tap Auto power off and select "Never" from the top of the list.
6. Tap Auto power on and select "ON".
7. Tap OK.
8. Tap the Home icon in the upper left corner.
More information regarding these settings can be found in the manual here:
https://ij.manual.canon/ij/webmanual/Manual/All/TR8600%20series/EN/UG/ug-182.html
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.